Fast-moving consumer goods (FMCG)
Highlights
- Sustainable innovation in the FMCG sector grew rapidly between 2019 and 2022 and may now be maturing. Patent filings for cleaning products and everyday packaging remain 39% above 2019 levels, although they have fallen from their 2022 peak.
- Cleaning product innovation is focused on making more sustainable ingredients work effectively. Henkel and Unilever lead patent filings for biosurfactants. Work on cold-wash and concentrated products focuses on making enzymes work well and ensuring products dissolve quickly.
- Packaging accounts for a large proportion of FMCG sustainability patent filings. Refillable packaging represents the highest filing area, with most activity coming from beauty and personal-care companies. South Korea is the most common country for first patent filings.
- Mono-material plastic packaging is a newer area of innovation. Most patent activity is in Japan, where three companies account for more than half of recent filings. Much of the work focuses on improving seals and joins so that simpler packaging structures work in practice.
- The details of packaging design are important to commercial success. New materials and formats need to work in practice and be easy to recycle or compost.
Introduction
Fast-moving consumer goods (FMCGs) have a daily impact on sustainability, from the ingredients used in cleaning products and the energy needed to wash clothes, to whether packaging can be reused or recycled. Across food, personal care and household products, manufacturers are seeking to reduce dependence on fossil-derived materials and unnecessary packaging while preserving the performance, convenience and affordability on which repeat purchases depend.
The technical challenges are closely connected. A detergent designed for a shorter wash needs ingredients that act quickly and a dose that disperses promptly. A concentrated refill changes both the formulation and the packaging system. Replacing plastic with paper introduces questions about moisture protection, sealing and product shelf life. Progress requires familiar products to work under different material and operating constraints.
This year’s Inside Green Innovation: Progress Report examines several areas along that path across both formulation and packaging. On the formulation side the areas covered are biosurfactants, cold and short-cycle washing and concentrated products, and on the packaging side refillable systems, paper and fibre, mono-material plastics and compostable materials.
Recent patent filings show expanding participation in biosurfactants and paper barriers, and a higher level of refill activity than in earlier years. In mono-material plastics, the development challenge is to preserve sealing, protection and easy opening within a simpler material structure. The patent filings show where development is directed and which challenges have persisted across generations of development.
Figure 1: 20-year trend (2005-2024) - patent filings across the seven FMCG technology areas
Innovation landscape and technology trends
Biosurfactants
Surfactants help water wet surfaces and carry away oils and dirt. Interest in renewable ingredients has encouraged the development of microbial biosurfactants produced by fermentation, including rhamnolipids, sophorolipids and mannosylerythritol lipids. These form part of the wider bio-based surfactant field, which also includes ingredients made through other processes.
Figure 2: 20-year trend (2005-2024) - in biosurfactant patent filings by year
Patent filing activity in biosurfactants increased substantially after 2019. Henkel and Unilever feature as prominent filers, alongside ingredient suppliers including Stepan, Evonik and Innospec. Europe accounts for a substantial share of first filings, alongside the US. The rise extends beyond the company with the most filings, showing broader participation in formulation development.
Figure 3: 15-year trend (2010-2024) - leading biosurfactant patent filings by applicant group
Figure 4: 15-year trend (2010-2024) - leading biosurfactant patent filings by first filing location
Growth in patent activity is being matched by growth in commercial supply, as Evonik inaugurated its industrial scale rhamnolipid plant in Slovakia in 2024, following its collaboration with Unilever. Greater commercial availability can give formulators more scope to develop products around biosurfactants, while cleaning, foam and sensory performance still depend on the surrounding formulation.
Development takes place both within the biosurfactant molecule and in the formulation around it. Locus Solutions describes sophorolipid derivatives bearing amino-acid functionality, alongside related surfactant structures. These change the ingredient itself, while blending and enzyme pairing aim to make ingredients work together.
Combining biosurfactants with other surfactants is a well-established process. Patents published in the 1990s already described glycolipid blends for oily-soil removal, and work published in 2012 addressed both enzyme combinations and the balance between mono- and di-rhamnolipids. Recent inventions refine those approaches for particular products. Stepan, for example, combines rhamnolipids with alkyl sulfates and builders while adjusting pH and mixture composition to address cleaning and surface residue. Innovation lies both in biosurfactant chemistry and in how the ingredient is formulated.
Other combinations are designed to address specific formulation requirements. Henkel’s sophorolipid formulation retains a conventional antimicrobial ingredient, whereas Innospec combines sophorolipids with a taurate surfactant to manage foam and maintain clarity. These examples illustrate how renewable ingredients can be incorporated into established product formulations while retaining other components where they remain necessary.
Enzyme systems offer a further example of this approach. A recent Henkel specification reports that combining sophorolipids with lipase produces faster breakdown of model fats than using lipase alone, an improvement that was not observed with the other biosurfactants tested. This demonstrates that the effectiveness of such combinations often depends on the compatibility of the individual biosurfactant and enzyme rather than on the general inclusion of a renewable ingredient. Formulation compatibility is therefore an important consideration in product development, with implications for both ingredient suppliers and consumer brands.
Cold and short-cycle washing
Cold-water cleaning has a long commercial history: Tide Coldwater was launched in 2005. Short programmes add another constraint because the dose has less time to dissolve, reach the fabric and act on stains. Unilever’s 2024 Wonder Wash launch, designed for cycles as short as 15 minutes, illustrates the commercial importance of combining speed with cleaning performance.
Figure 5: 20-year trend (2005-2024) - cold and short-cycle washing patent filings by year
Annual patent filing history toward cold and short-cycle washing shows how different companies are pursuing distinct approaches within this established area of research. Kao remains a prominent patent applicant, with much of its work focused on enzyme technologies. Unilever and Dow have concentrated on surfactant combinations, while P&G’s patents include approaches to odour control. These technologies address different formulation and performance requirements.
Figure 5: 15-year trend (2010-2024) - cold and short-cycle washing patent filings by applicant group
Figure 6: 15-year trend (2010-2024) - cold and short-cycle washing patent filings by first filing location
This area again shows that cleaning performance depends not only on the ingredients themselves but also on how well they function together. Kao’s amylase patents focus on removing starch stains at low temperatures while maintaining enzyme activity alongside other detergent ingredients. Some address enzyme instability caused by proteases, while others focus on maintaining activity in acidic or chelator-containing formulations.
The challenge is therefore not simply to develop an effective enzyme, but to ensure that it remains effective within the detergent formulation, where interactions with other ingredients can reduce its performance.
The way detergent is delivered also affects its performance in cold water. Earlier developments in concentrated granules focused on improving cold water dissolution, while more recent designs apply similar principles to detergent sheets and tablets. These include introducing interconnected pores into sheets and increasing the wetted surface area of tablets to help water penetrate and release their contents more quickly. Faster dissolution can help detergent ingredients become available earlier in the wash cycle, but it does not necessarily mean that stains will be removed more effectively or that a shorter wash programme will deliver the same cleaning results, demonstrating the range of performance requirements to be met.
Figure 7: selected inventions address dose release, cleaning and later odour control
Odour control may also extend beyond the wash cycle. P&G describes depositing bacterial spores on fabric for subsequent malodour control. A later patent application describes incorporating spores into soluble packaging film to avoid discolouration of the liquid detergent during storage. Here the package becomes a delivery component. The distinction between cleaning during the wash, releasing the dose and controlling later odour explains why a successful short-cycle product may depend on several complementary inventions.
Concentrated products
Concentration has reshaped laundry products over several decades. Kao launched concentrated Attack powder in 1987, while Tide PODS brought pre-measured liquid doses to market in 2012. Recent patent applications extend from high-active liquids and capsules to powders and solids that consumers turn into finished cleansers.
Figure 8: 20-year trend (2005-2024) - concentrated-product patent filings by year
Unilever is particularly active in recent filings, with Dow and Henkel also contributing. Removing water makes interactions between ingredients harder to manage. Unilever’s related applications adjust surfactant combinations, salts and solvents to preserve usable physical properties at very low water content. Henkel also addresses manufacturing: changing the order of ingredient addition can make a concentrated formulation easier to mix with conventional equipment. These are linked formulation and production problems, with consequences for how readily a compact format can be manufactured.
Figure 9: 15-year trend (2010-2024) - concentrated-product patent filings in household and personal-care applications by applicant group
Figure 10: 15-year trend (2010-2024) - concentrated-product patent filings in household and personal-care applications by first filing location
An important distinction can be made between how the different formulations are expected to behave when water is added. Laundry concentrates must disperse readily into the wash, which is the focus of Dow’s work on preventing the temporary gel-like phase that can form during dilution and delay dispersion. By contrast, a concentrate designed to refill a bottle of washing-up liquid may need to thicken after dilution. Unilever’s rhamnolipid-containing formulation achieves this through a combination of surfactant balance, a hydrotrope to maintain ingredient compatibility and salt to adjust viscosity. These examples illustrate how dilution requirements depend on the intended application, with laundry concentrates designed to disperse and washing-up liquid refills formulated to develop viscosity as they are diluted.
Figure 11: selected inventions require different behaviour when a concentrate is diluted
Powder refills also place greater demands on the preparation process at the point of use. Godrej’s powder-to-gel formulation requires the consumer to mix the powder with water and allow time for the mixture to stand, whereas Fillgood’s shampoo formulation uses a gum designed to disperse in cold water. Other patent work addresses changes in viscosity depending on the dilution water used, as well as the need to preserve the product once it has been reconstituted. Although removing water reduces the weight and volume of products during transport, it shifts some of the formulation process to the consumer. The resulting product must therefore hydrate consistently, develop the intended texture and remain adequately preserved under the preparation and storage conditions specified for its use.
Refillable packaging
Once a product can be replenished, the next question is what the consumer keeps: a simple bottle, a pump, an applicator or a more elaborate dispenser. The refill’s chemistry and the retained components must work together, while the replacement needs to be easy to fit and secure in use.
Figure 12: 20-year trend (2005-2024) refillable-packaging patent filings by year
Refill filings increased from the mid-2010s and remain above the earlier level despite annual fluctuations. The search results are strongly weighted towards beauty and personal care. Many of the patent applications were first filed in Korea, while first filings in Europe have grown sharply. L’Oréal’s activity has increased alongside work from Amorepacific and packaging or dispensing specialists such as CTK and GOJO.
Figure 13: 15-year trend (2010-2024) - refillable-packaging filings, mainly relating to beauty and personal-care products by applicant group
Figure 14: 15-year trend (2010-2024) - refillable-packaging filings, mainly relating to beauty and personal-care products by first filing location
Earlier refill patents already kept an outer housing or applicator while replacing an internal cartridge. Recent designs include both systems that retain the pump and systems that replace the pump together with the product container. Keeping more components in use can reduce replacement material but also requires those components and their connections to function over repeated refills. The environmental outcome depends on actual reuse, not simply the presence of a removable cup.
Interface design can also determine which refills a system accepts. HCP describes mechanically keyed cartridges, while GOJO uses electronic identification to control transfer into a dispenser. These features make refill compatibility a commercial choice as well as a mechanical one.
Replacing conventional packaging materials with fibre-based alternatives introduces additional challenges, as the new materials must provide sufficient product protection while remaining compatible with the packaging and dispensing system.
Paper and fibre packaging
Interest in replacing plastic and improving compatibility with paper recycling is focused on extending their use into more demanding applications. Moisture, grease, oxygen and fragrance protection can still require additional layers. The development task is to preserve that protection through manufacture and handling while allowing useful fibres to be recovered afterwards.
Figure 15: 20-year trend (2005-2024) - paper and fibre barrier patent filings by year
Patent filings in paper and fibre barrier packaging saw a spike around 2020 before remaining consistently higher than in previous years. The activity involves both consumer brands and material suppliers, including Nestlé, P&G and specialist manufacturers such as Koehler. Growth in filing has been seen across several territories, including Europe, the US and Korea, suggesting that interest in paper and fibre barrier technologies has strong drivers.
Figure 16: 15-year trend (2010-2024) - paper and fibre barrier patent filings, including enabling materials and related food-packaging applications, by applicant group
Figure 17: 15-year trend (2010-2024) - paper and fibre barrier patent filings, including enabling materials and related food-packaging applications, by applicant group
Earlier inventions already combined fibre with naturally derived gel-forming materials such as agar, or with biodegradable polyesters, to balance protection, adhesion and recovery. Recent work includes both synthetic polymer coatings and biopolymer systems. E&L Lab combines a silicone–acrylic copolymer with polyvinyl alcohol for barrier and heat-sealing functions; Newlight applies PHA particles from water, then dries and fuses them into a coating. A water-based coating can therefore still rely on synthetic polymers. Different layers continue to perform different jobs. Nestlé’s food-packaging design, for example, pairs a lined fibre tray with a metallised paper lid. A paper-based construction can consequently remain a carefully engineered multilayer system.
Dai Nippon Printing’s barrier laminate addresses a revealing point of failure: bending can damage a thin barrier. Its water-disintegrable adhesive acts as a flexible layer that helps protect the barrier during folding, while supporting separation during fibre recovery. Adhesive behaviour therefore affects both the pack’s service life and its treatment afterwards. Water dispersibility alone does not establish recyclability; the complete structure needs assessment of fibre recovery and recycling performance.
Mono-material plastic packaging
Paper barriers and mono-material plastics both seek to preserve packaging functions while improving compatibility with an intended recycling stream, through different material systems. Fibre recovery separates usable fibres from the construction; mono-material plastic development seeks a pack dominated by one polymer type, usually polyethylene or polypropylene. Mono-material describes the main polymer used, not the number of layers. A pack can still have several layers and small amounts of other barrier, adhesive or functional materials.
Figure 18: 20-year trend (2005-2024) mono-material plastic packaging patent filings by year
There has been a notable increase in mono-material plastic packaging patent filings since 2020. Many of the inventions were first filed for patent protection in Japan, with TOPPAN, Dai Nippon Printing and ZACROS particularly active. Their work concerns the details of making films into pouches and other packs: producing strong seals, surviving impacts, preserving barriers and opening predictably.
Figure 19: 15-year trend (2010-2024) - mono-material packaging patent filings by applicant group
Figure 20: 15-year trend (2010-2024) - mono-material packaging patent filings by first filing location
When a film structure changes, the sealing process can require redesign. TOPPAN describes a textured polyethylene sealant surface for ultrasonic sealing. Another TOPPAN application addresses local thinning where a spout is welded into a pouch, using a further welding operation to redistribute resin and preserve thickness at a vulnerable edge. These inventions show why substituting a resin can require changes to joining methods and tooling as well as to the film itself.
Opening creates another trade-off. One construction uses a common polyethylene or polypropylene base while adding components that help control fracture and tearing. The main polymer can dominate without every constituent being identical. Recyclability still depends on the finished pack, including adhesives, barriers and labels; RecyClass guidelines assess their compatibility with particular recycling streams.
The EU Packaging and Packaging Waste Regulation began applying generally on 12 August 2026. Its general recyclability duty now applies to packaging placed on the EU market, with detailed design grades and recycling-at-scale requirements following later timetables. This strengthens the commercial relevance of inventions that preserve pack performance within structures compatible with material recycling.
Compostable packaging
Compostability requires biodegradation, disintegration and acceptable effects on compost quality under specified conditions. Visible fragmentation is insufficient. Renewable feedstock alone does not establish compostability, and industrially compostable materials may be unsuitable for home composting.[48] The relevant development question is therefore how a complete pack serves its application and the intended treatment route.
Figure 21: biodegradable and compostable packaging patent filings by year
The broader biodegradable and compostable packaging search shows a recent filing increase across a dispersed set of participants, including material companies, packaging manufacturers, universities and smaller developers. Applications first filed in Europe, the US, Korea and India all contribute. The work encompasses very different functions, from protective cushioning to food-contact barriers.
Figure 22: 15-year trend (2010-2024) - biodegradable and compostable packaging patent filings, including enabling materials and related packaging designs by applicant group
Figure 23: 15-year trend (2010-2024) - biodegradable and compostable packaging patent filings, including enabling materials and related packaging designs by first filing location
Material names alone can obscure those differences. Starch and other polysaccharides appear in expanded cushioning, films and coatings; proteins provide further film-forming options. Polyester routes include PLA, PHAs and other biodegradable polyesters. Earlier PHA blends already addressed toughness and processing, so blending is an established approach. Moisture sensitivity can be useful in a disposable protective fill yet undesirable in a pack holding a wet product. Comparing the intended function is more informative than treating every biodegradable formulation as a substitute for the same plastic pack.
Figure 24: selected inventions illustrate different functions for biodegradable and compostable packaging
As with paper-based and mono-material packaging, combining different layers creates its own challenges. BASF, for example, pairs a biodegradable film with a compatible adhesive, controlling the lubricant and film thickness to maintain the intended composting properties. Stora Enso combines PHA film with bonding and sealing layers, alongside a thin coating that acts as a barrier on the paperboard. These examples show why the whole packaging structure matters. Using a compostable material does not automatically mean that the finished package, including its adhesives, coatings and additives, will also meet composting requirements.
European packaging rules make clear where compostability is required. By 12 February 2028, certain beverage bags and soft single-serve packaging disposed of with their contents, as well as sticky labels on fruit and vegetables, must meet industrial compostability requirements. For other packaging, including packaging made from biodegradable materials, the general requirement is to design for material recycling, subject to specific exceptions and permitted national extensions. This means manufacturers must consider not just the materials they use, but also whether the finished pack is suitable for the collection and treatment systems available. This will be an important factor in determining which designs are commercially viable.
Commercial interpretation
The recent inventions show several routes towards more sustainable FMCG products. Biosurfactant development encompasses changes to the molecules themselves and to their wider formulations; cold washing depends on both ingredient performance and timely delivery; and concentrates make dilution behaviour part of product design. In each case, earlier patents reveal established approaches that newer work adapts to more particular combinations and operating conditions.

Packaging development is similarly specific. Refill interfaces determine what remains in use and which replacements fit. Fibre barriers need protection during folding and separation during recovery. Mono-material plastics require sealing and opening functions to work within a simpler polymer mix, while compostable constructions must suit a defined disposal route. These details point toward the commercially meaningful work to come: in the ingredients, formulations, interfaces and manufacturing steps that allow a proposed format to function reliably as an everyday product."
Looking ahead
Three developments are likely to shape FMCG sustainability patenting over the coming years:
- Formulation work is likely to stay focused on capturing newly available sustainable ingredients while also improving the overall environmental footprint of the product. Greater commercial supply of biosurfactants gives formulators more scope to build products around them, while enzyme pairing, surfactant balance and behaviour on dilution remain areas where further performance improvements are being sought.
- Packaging filings are likely to keep following the regulatory timetable. The EU Packaging and Packaging Waste Regulation now applies generally, with detailed design grades and recycling-at-scale requirements to follow and compostability requirements for specified formats from 12 February 2028. Inventions that preserve pack performance within structures suited to a defined recycling or composting route are best placed to benefit.
- Refillable packaging may see continued growth, with interfaces and compatibility continuing to feature. Filings have eased from their 2022 peak but remain well above earlier levels, and first filings in Europe have grown sharply alongside Korea’s lead.
Overall, new patent filings were lower in 2024 than in 2022 in six of the seven areas. It will be interesting to see whether that easing continues, and whether the easing primarily represents a maturing sustainability offering.
Meet the attorneys

